Electromagnetic flowmeters are suitable for various applications of various conductive liquid media

Get the security applicationBilletCertification

Foundation HART7 registration,Self-test and self-diagnostic

DN8~DN2000、316 material shell with explosion-proof certification can be used in harsh sea conditions

l Caliber range:DN8 ~ DN2000

l Body material: carbon steel spray, stainless steel304, or 316 stainless steel

l Lining material:PTFE, FEP, PFA, neoprene, polyurethane rubber

l Electrode material:316L, Hb, Hc, Ti, Ta, Monel, tungsten carbide, platinum, platinum and iridium alloy

l Grounding ring:316L、Hb、Hc、Ti

l Electrode type: In addition to standard electrodes, a scraper electrode or a replaceable electrode can be optionally installed.

l Dielectric conductivity: Standard type ≥15μS/cm, low conductivity type 1.6~15μS/cm

l Accuracy:0.2Level 0.5, Level 1.0

l Flow rate range: 0.3m/s～12m/s (initially moving flow rate under laboratory conditions 0.05m/s)

l Working pressure: 0.6MPa～42MPa/150LB～2500LB or customized according to your requirements

l Media temperature: PTFE (-80～+180℃), FEP (-50～+150℃), PFA (-50～+180℃), neoprene (-45～+80℃), polyurethane rubber (-30～+70℃)

l Ambient temperature: Ordinary type: -40℃~+80℃ Explosion-proof type: -40℃~+60℃

(Note: The working environment temperature of the LCD display is -20℃~+70℃, and will not be damaged when it is lower than -20℃, and it can still work normally after returning to temperature. The working environment temperature of the OLED display is -40℃~+70℃)

l Converter: optional cast aluminum spray polyester, or stainless steel housing

l Suitable power supply:85～250VAC、20～36VDC

l Power supply:<20W

l Protection level:IP66 / IP67、IP68

l loseOutput signal: Current: 4~20mA (optional dual output), frequency/pulse: 1~5000Hz, alarm signal

l Communication protocol:FOUNDATIONFieldbus（FF）、PROFIBUS-DP、PROFIBUS-PA、RS485/Modbus或HART

l Instrument structure: integrated, split type (can be equipped with split cables and stainless steel brackets)

l Explosion-proof level:Exdbiaq[iaGa]IlCT ... TatGb

l Electrical interface: M20×1.5(F), 1/2"NPT(F) or customized according to your requirements

Oil and gas:

l Flow measurement and water return monitoring of oilfield production liquid (high water content oil and sewage)

l Flow monitoring of liquid by-products (condensate, dehydrated water) in natural gas treatment plants

l Measuring medium and high flow liquid media during oil refining and petrochemical processes, such as naphtha, diesel, etc.

Chemical Industry:

l Flow metering and control of highly corrosive liquids (such as concentrated sulfuric acid, sodium hydroxide, hydrochloric acid, etc.)

l Accurate measurement of high viscosity or solid particles (such as slurry, emulsion) during chemical production

l Real-time monitoring and safety control of pipeline flow in hazardous chemical conveying systems

Water treatment project:

l Monitoring of inlet and outlet water flow in urban sewage treatment plants

l Flow management in industrial circulating water, cooling water and wastewater reuse systems

Other industries:

l The power industry boiler feed water and cooling water flow control

l Detection of slurry and mine water flow in mining industry

l Sanitary flow application of cleaning water and finished liquids in the food and pharmaceutical industry